EN
Avoiding the Most Common Drawer Runner Installation Mistakes
One mistake, she said, is not measuring. Be sure to carefully measure the length of the drawer runners to ensure they will fit. Those runners need to be just the right length not too short, not too long, or the drawers won’t slide in and out.
Another fail is draw runners that aren't aligned. The long drawer runners must be straight and parallel to the sides of the drawer. If they are not aligned properly, the drawers will be crooked and not glide evenly.
How to Rectify Installation of Drawer Runners
If you have already made some mistakes with the runners don’t despair! You can fix them. Men: If the runners are too short, you could add shims to make them longer. You can also trim them to the right size if they are too long.
If you want to make sure all of the drawer runners are lined up correctly, use a level to make sure they are straight. You can also take a ruler, measure from the sides of the drawer to the runners and fine-tune them.
Quick Fixes For Drawer Runner Installation Issues
If your drawers aren’t gliding smoothly, there are some solutions you can try. One frequently heard complaint: The drawers get stuck. This may due to the dirt or dust on the runners. Clean the runners by wiping them down with a damp cloth.
Another problem is the drawers slip too freely in and out, and fall off the runners. You can fix this by adding sticky velcro strips to the sides of the drawers to provide a little more traction.
Problems with Installation of Drawer Runners - How to Resolve Them?
If you’re still experiencing trouble with your other drawer runners, other problems may be afflicting them. One possibility would be that the fitting drawer runners are too slack. The screws that hold the runners in place are adjustable, so you can test them out to see which ones stay in place and which ones are too loose.
Another possibility is that the runners are bent or broken. If this is the case, you may wish to replace the runners with new ones to ensure they work reallly smoothly.
How to Avoid Drawer Runner Installation Mistakes in the Future
To prevent you from making mistakes when installing drawer runners in the future make sure you read the instructions properly before you begin. It only costs to check twice and be right rather than wrong. The runners should fit well and be properly aligned before they’re screwed to the drawers.
Following these, here are the best tips anyone can follow to ensure their drawers always slide smoothly both in and out. Don’t forget that the right fitting of drawer runners is absolutely vital to ensure your drawers run smoothly. With a bit of care, you can work around common pitfalls and wind up with drawers that glide without a hitch.
